How do I power up the Sierra Wireless GX440?

Briefly press the Reset button to initiate a power up or reboot. All LEDs turn Red, then Yellow, then Green, and then light in the configurations below. After the kernel has booted, while the ALEOS software is initializing, the Power LED turns Yellow, then Green, and the Network LED will flash Yellow, change to a solid Yellow, and finally turn Green.


Category: General M2M Question, Sierra Wireless Products

← FAQs
Share this Article..Email this to someoneShare on FacebookDigg thisTweet about this on TwitterShare on TumblrShare on StumbleUponShare on RedditPrint this pagePin on PinterestShare on LinkedInShare on Google+