How many Ethernet LEDs are visible on the GX400?

The Sierra Wireless GX400/440 has two visible Ethernet LEDs on the rear panel of the GX400 and GX440 devices: Left LED (Activity) – Blinks Yellow when there is activity Right LED (Link Speed): Green – 100 Mbps Orange – 10 Mbps AirLink GX400 + GX440...

How do I perform a manufacturer reset on the Sierra Wireless GX440?

The Sierra Wireless GX400/440 can be reset to factory defaults by pressing and holding the “Reset” button continuously for 7 – 8 seconds. When all LEDs start flashing Yellow, release the Reset button and the unit will re-boot with the factory default...

How do I power up the Sierra Wireless GX440?

Briefly press the Reset button to initiate a power up or reboot. All LEDs turn Red, then Yellow, then Green, and then light in the configurations below. After the kernel has booted, while the ALEOS software is initializing, the Power LED turns Yellow, then Green, and...

What do the different colored LED lights mean on the GX400?

The LED lights on the GX400 and GX440 stand for the following: Off – No activity Green – Fully functional Yellow – Limited functionality Red – Not functional Blinking – Where needed, blinking can be used to indicate altered...