How do I activate the Modem in a CradlePoint IBR600E/IBR650E router?

This article was written based on firmware 5.0.0.
VERIZON 3G EVDO
COR IBR600E & COR IBR650E

 
A wireless broadband data plan must be added to your COR product. A new line of service can be added, or a data plan can be transferred from an existing account. Wireless broadband data plans are made available from Verizon, and are required to allow your modem to connect and transfer data on their network
 
To add or transfer a broadband data plan, or to check if your modem has a broadband data plan attached, contact you Verizon representative and provide them with the COR IBR600E or COR IBR650E model number and ESN from the product.
 
After adding a data plan to the COR IBR600E or COR IBR650E router, the modem may need to be activated.
To activate the modem.
 
COR IBR600E & COR IBR650E
Login to the COR Setup pages and select Internet from the top navigation bar then Connection Manager from the drop-down menu, find and select the CradlePoint “EVDO Modem” and click Control modem and click Activate.
When modem activation is complete, confirm the modem LED is solid green on the router.
 

Sprint 3G EVDO
COR IBR600E & COR IBR650E

 
A wireless broadband data plan must be added to your COR product. A new line of service can be added, or a data plan can be transferred from an existing account. Wireless broadband data plans are made available from Sprint, and are required to allow your modem to connect and transfer data on their network
 
To add or transfer a broadband data plan, or to check if your modem has a broadband data plan attached, contact you Sprint representative and provide them with the COR IBR600E or COR IBR650E model number and ESN from the product.
 
After adding a data plan to the router the first time the COR router is powered on, an Over the Air activation process will start and may take a few minutes.  When modem activation is complete, confirm the modem LED is solid green on the router.


← FAQs