FAQs

Digi Remote Manager

Remote Manager uses tags to categorize devices.  You may want to edit the tags associated with a device if the purpose of a device changes or if you use tags to create a new sub-category of devices. Device tags are stored in Remote manager and not on the device.

To add a tag to a device:

  1. Click Device Management > Devices.
  2. Select the device you want to update.
  3. Click More > Edit Tags. The Edit Tags dialog appears.
  4. Enter the name of a tag in the text box and click Add Tag.
  5. Click Save. The new tag is associated with the device.

To edit tags for a device:

  1. Click Device Management > Devices.
  2. Select the device you want to update.
  3. Click More > Edit Tags. The Edit Tags dialog appears.
  4. Click the tag name you want to edit. The tag name appears in the text box.
  5. Edit the tag name as needed and click Change Tag.
  6. Click Save. The new tag is associated with the device.

To remove a tag from a device:

  1. Click Device Management > Devices.
  2. Select the device you want to update.
  3. Click More > Edit Tags. The Edit Tags dialog appears.
  4. Click the red X under action to delete the corresponding tag underStream Name.
  5. Click Save. The new tag is associated with the device.

Permalink


The groups feature allows you to add or create a group and assign a list of devices to that group. You can create a hierarchical structure of device groups to help organize your device inventory.

To create a group

  1. Click Device Management > Devices.
  2. Click the Groups button and select Add Group. The Add Group dialog appears.
  3. Type a group name.
  4. Choose the folder where you want to place the new group. The default is the root level.
  5. Click the Add Group button. The group name appears in the folder structure under the root directory in the left pane.

To add a device to a group
You can add one or more devices to a device group, and can add up to 500 devices to a group at one time.

  1. Click Device Management > Devices.
  2. Select the device(s) you want to add to a group:
  • Click any device list item to select that device.
  • Use Control-click or Shift-click to select multiple devices or a range of devices.
  1. Click More in the Devices toolbar and select Assign to Groupfrom the Organize category. The Add to Group dialog appears.
  2. Choose a group from the drop-down list.
  3. Click Assign to Group. The devices are added to the selected device group.

To move/remove a device from a group

  1. Click Device Management > Devices.
  2. Click a group name in your list of device groups you wish to remove the device from.
  3. Select the device(s) you want to remove from a group:
  • Click any device list item to select that device.
  • Use Control-click or Shift-click to select multiple devices or a range of devices.
  1. Click More in the Devices toolbar and select Assign to Groupfrom the Organize category. The Add to Group dialog appears.
  2. Choose a group from the drop-down list.  You may also select the “/” to move it to the root directory.
  3. Click Assign to Group. The devices are added to the selected device group or root.

To edit device group properties
You can edit device group properties, including the group name and its parent in the groups hierarchy.

  1. Click Device Management > Devices.
  2. Click a group name in your list of device groups.
  3. Click Groups and select Edit Group from the drop-down.
  4. Make changes to the group name and location as needed.
  5. Click Edit Group to confirm your changes.

To Remove a device group
Removing a device group removes the group itself and moves all devices in that group to the parent level in your device list.

  1. Click Device Management > Devices.
  2. Click to select the device group you want to remove from the device hierarchy in the left panel under Groups.
  3. Click Groups and select Remove Group from the drop-down. A confirmation dialog appears asking you to confirm that you want to remove that group.
  4. Click Yes to confirm. The group is deleted and any devices in that group move to the parent level in your device hierarchy.

To show or hide device groups
This feature will allow you to toggle the Groups display to hidden or visible.

  1. Click Device Management > Devices.
  2. Click the Show/Hide Groups button on the far left side of theDevices toolbar.

Permalink


This article describes how to configure Digi Device Cloud or Digi Remote Manager to send an E-Mail notification when a device goes offline.

Note: This article assumes that you have already created a Digi Device Cloud account or a Digi Remote Manager account, that your device is configured to connect to the cloud and added to your account.

Guidelines for NDS devices (Digi Connect WAN 3G, ConnectPort X etc..) can be found here : Configure a Digi Connect WAN or ConnectPort Gateway for Device Cloud connection

Guidelines for Digi TransPort can be found here : Configuring a Digi TransPort for Remote Manager connectivity

Guidelines for adding a Digi device to the Digi Device Cloud or Remote Manager platform can be found here : Adding a Digi Device to the Digi Device Cloud or Remote Manager Platform and here Add a Digi TransPort to your Remote Manager account

Create an Alarm

1. Log into your Digi Device Cloud or Digi Remote Manager account.
2. Click on the Device Management tab.
3. Click on the Alarms tab.
4. Click on the Add button

User-added image

The Add Alarm window will open.

1. Select Device Offline in the Alarm Type drop down menu.
2. Chose a name for the Alarm. (default is Device Offline)
3. Chose a description for the Alarm. (default is Detects when a device disconnects from Device Cloud and fails to reconnect within the specified time)
4. Chose for how long the cloud should wait before firing an alarm (defaul is 5 minutes. This is recomended in case of cellular devices that can sometimes lose network connectivity due to bad reception and allow it to reconnect)
5. Resets when device reconnects will allow the alarm status to be reset as soon as the device reconnects to the cloud.
6. Chose the Scope of the alarm. It can be per group or per device. Per Group allows to select the root directory (in this case the alarm will be applied to all devices on this account) or a single group.
7. Click Create to create the Alarm.

User-added image

Create an E-Mail Notification

1. Navigate to Admin Account Settings > Notifications
2. Click on the Add button.

User-added image

1. Chose a name for the Notification
2. Chose a Description for the notification. This will be shown in the “Subject” field of the E-Mail
3. Chose an E-Mail address to send the notification to.
4. Select if you wish to receive a daily summary of your alarms and at which time.
5. Check this box to receive an E-Mail notification each time an alarm triggers (Each time a device goes offline this will trigger an alarm which in result will trigger an E-Mail)

User-added image

6. Select “Send notification for the following alarms” and in the box, type the name of previously created alarm, by default “Device Offline” and press enter.
7. In the list, chose the previously created alarm and click on the “+” icon

User-added image

8. Click Save

User-added image

Testing

To test that the Alarms and notification are working, simply disconnect/turn off one of your devices which are monitored by this alarm. After the selected delay triggers, the alarm should fire and you should receive an E-Mail similar to this one :

User-added image

Permalink


Introduction:

This article will discuss how to configure your Digi TransPort router for use with Remote Manager by utilizing the built-in Web User Interface (WebUI) of the Digi TransPort itself.

Changing the Remote Manager connection settings from the WebUI

The Digi TransPort WebUI can be accessed locally via the local IP address (LAN or WAN), or the Cllular Mobile IP address (provided your cellular account is one which supports Mobile Termination, and that you left a pinhole for HTTP or HTTPS through which to get to the WebUI if configured for IP Passthrough).

If you know the Mobile IP address and have met the conditions above, you should be able to open the TransPort’s WebUI by opening a browser to the Mobile IP of your TransPort at this time, but keep in mind that accessing the TransPort WebUI via the Local IP is preferred if available, since it doesn’t affect your cellular bill, is faster, and generally less prone to connection loss.

If you can get to the Local IP of the TransPort (this is an Ethernet or Wi-Fi connected TransPort and you’re at that location), you should access the TransPort’s WebUI using the Local IP address instead. The Digi Device Discovery Tool for Windows can be used to discover the Local IP address of the TransPort, if unknown. If you run the Device Discovery Tool and see a “No devices found?” message, and you’ve verified your TransPort is both powered on and has a solid Link LED present, you may want to check this article for Digi Device Discovery Troubleshooting Tips.

Assuming you can access either the Mobile (WAN) or Local (LAN) IP address and are now looking at the Web User Interface of your Digi TransPort:

1. Open Configuration -> Remote Management -> Remote Manager on the WebUI, then click the check box for “Enable Remote Management and Configuration using Remote Manager”. It should look similar to this:

2. On the page above, from the drop down menu, select the desired Device Cloud server :remotemanager.digi.com for the US Cloud or remotemanager-uk.digi.com for the EU Cloud.

3. Ensure the “Automatically reconnect to the server after being disconnected” box is checked as shown in the example, and configured with the 10 second value listed (or a reasonable alternative), as this is the box that tells your router to re-connect to the Remote Management server, should the connection get broken for some reason

4. Apply any changes by clicking the Apply button, when configuration is complete.

5. Click the blue “here” link to save the configuration, as shown below:

6. Click the “Save All” button from the ensuing page and you should get a message saying “The configuration has been saved successfully!”, then click the OK button.

7. After a minute or so, you should see that your Transport has established (i.e. state = ESTAB) a Remote Management connection to the Remote Manager server by viewing the Management -> Connections -> IP Connections page under the “General Purpose Sockets” listing towards the bottom:

In Closure: If all went well, your Digi TransPort should now be “Connected” on the Remote Manager server you selected in step 1 above.

Permalink


Adding your Digi TransPort to Remote Manager

  1. Log into your Digi Remote Manager account.
  2. Click on the Device Management tab.
  3. Click on the Add Devices button on the tool bar

  4. Add the Digi TransPort by either discovering it locally, or manually adding the Device ID, using either of the the two methods described below:

Discovery method:

  1. After hitting Add Devices (step 3 above), click the Discover >> button.

  2. Click the Discover button on the 2nd Add Devices screen.

  3. Select the Digi TransPort to be added, and click OK.

Manual method:

  1. After hitting Add Devices (step 3 above), click the dropdown which defaults to MAC Address, and select Device ID instead.

  2. Populate the entry field to the right of Device ID with the Device ID of your Digi TransPort.  This can be obtained from the Digi TransPort WebUI Home page if needed.

  3. Click the Add button, then click OK.

Your Digi TransPort should now be added to Remote Manager:

After your device is added, it should show up in the list of devices as disconnected (a Red icon beside the device means Disconnected, see below).

After a minute or so, refresh the device list by clicking the Refresh button, and verify a Connected state as seen below.  A Blue icon indicate the device is connected to Remote Manager.

 

Conclusion:

If you see the Blue/Connected icon next to your TransPort, it means that your device was properly configured, and you can now manage your TransPort on Remote Manager.  If still not connected after a a few minutes, you’ll want to re-check your TransPort Remote Management and Network configurations, as well as make sure you aren’t running into any Firewall issues between the TransPort and Remote Manager.

Permalink


← FAQs