The following example shows how to create a task on Digi’s Device Cloud to change the Remote Management Server Address in a TransPort.
Log into Device Cloud
Click on Device Management > Schedules and then click New Schedule
Click Start Walkthrough
Type in the description at the top of the screen for the task
On the left menu, select Command Line Interface
For the first command, enter cloud 0 server my.devicecloud.com
On the left menu, select Command Line Interface, again
For the second command, enter config 0 saveall
Then click Schedule at the bottom right hand corner
Either select Immediate or Future to schedule when you wish to apply this change
If you choose Future, you will need to use the drop down buttons to specify the date and time and then you will see the scheduled job on the next screen.
If you choose Immediate, it will simply complete the job.
You will need to select the devices you wish to apply these changes to. If selecting more than one, use the “Ctrl” button to select these.
Select Run Now at the bottom of the screen if you choose Immediate or Schedule if you choose Future.
Here are the results for a scheduled job.
After the scheduled event, you can check to see if it performed by going to Device Management > Operations. You should be able to see if it successfully completed or not. You may also click on Operation Details for each individual device.
You can also see the changes in each individual device by going to Device Management > Devices, selecting a particular device by double clicking on it, click on Configuration, Remote Management, Remote Manager, Remote Manager Config, then check the Connect to Device Cloud server. At first you will see the previous server name, but if you click Refresh at the bottom of the page, it will update.